Tagged: Uncategorized

Ending the debug session in Visual Studio 2013 Preview kills IISExpress, and how to fix it

It seems that by default when you end the debugging session of an ASP.Net app in Visual Studio 2013 Preview, it will kill the IISExpress instance as well. This is fairly annoying as my workflow usually involves leaving the browser window open and just doing a new build, and then refreshing the browser. Fortunately it was an easy fix, all you need to do is go the the project properties for the web application, go to the web tab, and uncheck “Enable Edit and Continue”.

I hope that this is just a bug and will be fixed in the final release of VS2013, as the idea of finally getting edit and continue back is cool, but not at the expense of killing IISExpress.

Error running Node JS in IISExpress and IISNode

I recently started playing around with Node JS, and have been going through TekPub’s BackBone JS tutorials (which uses Node for the backend).  In the tutorial, Rob uses Webmatrix on Windows8, and I followed along, however, I ran into a problem the first time I tried to run the site using IISExpress and IISNode:

“The iisnode module is unable to start the node.exe process. Make sure the node.exe executable is available at the location specified in the system.webServer/iisnode/@nodeProcessCommandLineelement of web.config. By default node.exe is expected to be installed in %ProgramFiles%\nodejs folder on x86 systems and %ProgramFiles(x86)%\nodejs folder on x64 systems.”

I went into the web.config file, and there is a commented out section for a bunch of different options for IISNode.  One of them is nodeProcessCommandLine, which is the path to node.exe.  On 64 bit systems, this is installed in Program Files, and even though the path was correct, IISNode refused to start.  I did some searching and found this post on StackOverlow, which suggested that there is a current bug in IISNode where it always looks for node in the 32 bit path (Program Files (x86)).  The solution was to go back to Node’s website, and download and install the 32 bit version.  This worked for me, but I was surprised that more people haven’t run into this issue, and the default install from Node is the x64 version.  Hope this helps anyone else that runs into this problem.

MVC4 Quick Tip #4–Updating a model the HTTP way with ASP.Net Web API

Disclaimer: This code is based on MVC 4 Beta 1, and might change in future releases.

The www.asp.net/web-api website has a few good videos and decent examples, however, I didn’t notice a concrete way of doing an update using ASP.Net Web API.  So I thought I would quickly document how I implemented it for anyone else looking how to do so, and will welcome any comments or suggestions if I am going about this the wrong way.

ASP.Net Web API embraces HTTP and all that comes along with it, and that is one of the main differences between APIControllers and the regular controllers found in MVC.  In MVC, you would normally do all your CUD (Create, Update, Delete) through POST actions to the controller.  In ASP.Net Web API, the recommended way is to use the POST verb for creating objects, PUT for updating objects, and DELETE (you guessed it) for deleting objects.  So instead of having a controller decorated with HTTP Verbs attributes, APIControllers uses a convention in the way you name your methods.  If the method begins with Get, it must be a get request, Post, a create request,and so on.

Below is a quick example of doing a PUT request to an APIController.  Your update logic will undoubtedly   vary, but it is the outline of the method that is important:

 HttpResponseMessage<Person> PutPerson(Person person)
                var response = new HttpResponseMessage<Person>(person, HttpStatusCode.OK);
                response.Headers.Location = new Uri(Request.RequestUri, "/api/person/" + person.Id);
                return response;

The jQuery AJAX call for this method is as follows:

$.ajax("/api/person", {
                 data: person,
                 type: "PUT",
                 contentType: "application/json",
                 statusCode: {
                     200: function (data) {
                     500: function (data) {

MVC4 Quick Tip #3–Removing the XML Formatter from ASP.Net Web API

ASP.Net Web API provides a powerful new feature called content negotiation that will automatically format of your requests based on what the client asks for.  For instance, if the client sends ‘application/xml’ in the Content-Type HTTP header, then the format of your response will be XML.  The two default formatters included in Web API are the XML formatter, and the JSON formatter. The beauty of the automatic content negotiation is that you don’t need to write any code to map your models into these formats, it is taken care of for you by the formatters.  You can even create your own formatters to serve up different types as well, such as images, vCards, iCals, etc.

If all you are doing with your Web API is serving up JSON to either web or mobile clients, you might not feel the need to offer up any other format besides JSON.  This might also be helpful for quickly testing your APIs when hitting them with a web browser as some browsers send application/xml as their default content type.

Disclaimer: This code is based on MVC 4 Beta 1, and might change in future releases.

To remove the XML formatter is really easy, and I found this tip from Glenn Block, who conveniently posted this to his blog while I was searching for a way to do this.  In order to do so, put the following code somewhere in your Application_Start method in the global.asax.cs file:


MVC4 Quick Tip #2–Use Delegates to setup the Dependency Resolver instead of creating a Dependency Resolver class

I’m a big fan of cutting out unneeded or unnecessary code, so here is a tip that isn’t new in MVC4, but I just discovered it and thought it was really cool and worth sharing.  When using IOC in MVC, you setup a class that implements IDependencyResolver, which has methods to return services for a given type.  While these classes where simple, it always seemed like a bit of ceremony was required whenever starting up a new MVC app.

The following example shows what a DependencyResolver class looks like using my favorite IOC framework, Ninject:

public class NinjectDependencyResolver : IDependencyResolver
             private readonly IKernel _kernel;
             public NinjectDependencyResolver(IKernel kernel)
                 _kernel = kernel;
            public object GetService(Type serviceType)
                return _kernel.TryGet(serviceType);
            public IEnumerable<object> GetServices(Type serviceType)
                return _kernel.GetAll(serviceType);

Nothing terribly complicated, but a lot of fluff.

I saw in a demo in last week’s C4MVC talk, that the DependencyResolver that was setup to create the APIController classes had some overrides I never saw before, and low and behold, the standard MVC DependencyResolver also has these overrides:


So instead of providing the SetResolver method with a DependencyResolver class, you can just provide it two delegate methods that would normally be in the DependencyResolver (GetService, and GetServices):

                     x => kernel.TryGet(x),
                     x => kernel.GetAll(x));

POW!  Cut that 20+ line class down to a method that takes two parameters.  BAM!

MVC4 Quick Tip #1–Put your API Controllers in a different folder to avoid class naming collisions

This post is the start of a series of quick tips for Asp.Net MVC 4, which was released in beta form last week.  You can find out more about MVC4 and download the beta from www.asp.net/mvc/mvc4.

Disclaimer: This code is based on MVC 4 Beta 1, and might change in future releases.

MVC 4 ships with the new Asp.net Web APIs, which allow you to create RESTful services from within your web projects (Web Forms or MVC).  In previous versions of MVC, people commonly used Controllers to return JSON to front end websites and other clients.  While this worked for many scenarios, it was difficult to create services that were truly RESTful in nature, taking advantage of all that HTTP had to offer.

With Web APIs, you can now create “API” Controllers.  While these controllers don’t require you to follow REST, their default behavior encourages you to do so.

When starting up a new MVC 4 project, you might be tempted to put new API Controllers in the same folder  (or more accurately, namespace) as your MVC Controllers.  While this will work, you are limited in that you cannot have two classes with the same name in the same namespace.  It will be a common scenario when you have a MVC Controller with the same name as a API Controller.  For instance, you can have a MVC AccountController to serve views for Accounts in your system, and an API AccountController to respond to XHR requests from your website (or mobile devices, other services, etc..).  One way I have found to get around this limitation is to put your API Controllers in a folder called API (or whatever folder/namespace you wish), like so:


Default routes in MVC 4 will respond to MVC controllers with the route of /{controller},  and the default API route will respond to routes of /api/{controller}.  Since the AccountsController in the API folder inherits from APIController, it is okay that you have two classes named AccountsController in your project, the routing engine will know to use the correct one in the API folder.

A quick update on Rocky Mountain Tech Trifecta 2012

I have been getting a lot of inquiries on what or if anything is happening with the Rocky Mountain Tech this year.  And rightfully so, as it has nearly been a year since last year’s Trifecta took place.  

The answer to these questions is yes, there will be a Trifecta this year, and that I am currently trying to nail down the dates and logistics with our venue.  I wanted to host the Trifecta around a month later this year compared to years past, but it looks like it will be a bit longer wait then that.  I should have everything worked out in the next few days, and will be announcing the date soon, so stay tuned to www.rmtechtrifecta.com and @rmtechtrifecta.

Microsoft MVP Award for ASP.Net/IIS

I was honored this morning when I checked my email and discovered that I have been awarded a Microsoft MVP Award in ASP.Net/IIS for the 2011/2012 year.  This was a great surprise and I’m excited to be joining a group of people I highly regard in the community.

For those of you not familiar with the MVP program, Microsoft MVP’s are those individuals that share their time and knowledge with the developer community around Microsoft tools and technologies.  They might be leaders of user groups, speakers, prolific bloggers, authors, or just anyone who enriches the community they participate in.  For more information on the MVP program, check out the MVP site on Microsoft: http://mvp.support.microsoft.com/

I would like to take the time to thank some of the local MVP’s in the Colorado area for their great contributions, and for providing leadership and mentorship to me.  These individuals include (but not limited to):
Chris Wallace
Ben Hoelting
Joe Mayo
Julie Yack & David Yack
Kathleen Dollard
William Wergeson

I’m excited to be joining this group of distinguished individuals, and hope I can live up to the high standard they have set before me.

Notes from Build Conference Day 2 Keynote

Just like yesterday, here are my raw notes from watching the Build day 2 keynote.  Also just like yesterday, I don’t guarantee the accuracy of these Smile

Day 2 keynote

·         Theme

o   Windows server 8, azure, vs2011

·         Multiplayer game between wp7 and windows 8 communicating through azure

·         Productivity power tools has 1m + dl

o   Installed by default in vs2011

·         VS 2011

o   Find matching clones

§  Finds code similar to selected text?

o   Image editor built into vs2011

§  Loading of 3d model directly in vs

o   DOM explorer

§  Kind of like firebug inside of vs

§  Clicking a link will open the server side file in vs  `              

·         MVC4

o   New template

§  Uses html5

§  Works with mobile devices well

o   New async keyword used for controllers

o   Mobile optimize

§  Theres a new mobile template

§  jQuery mobile will ship by default in asp.net


·         ASP.NET

o   Bundling and Minification

§  Automatically minifies & combines and includes css/js

§  Similar to pipeline in rails?

o   WebSocketHandler

§  New handler built for web sockets?

§  New in .net 4.5

o   Quick deploy to Azure

·         .Net 4.5

·         TFS 2011

o   Team Foundation Service hosted in azure

o   Activation code included in packet to use tfs in azure

·         Windows Server 8

o   Storage spaces

§  JABOD – just a bunch of disks

o   Virtual Machine

·         Azure

o   Data platform

§  Sql azure

§  Table storage

o   Access Control Service

§  To keep devs from writing tons of code for access

·         Reimagining Microsoft

o   New hardware

o   Cloud services

o   New app scenarios

o   New dev opportunities

·         WP7.5

o   30k apps

o   New phones coming

·         Estimating 350+ installations of windows shipping this year

Notes from Build Conference Day 1 Keynote

Here are my raw, unedited notes from today’s Build conference keynote that I took while watching the live stream.  I don’t make any claim they are 100% accurate, but just what I interpreted as I heard them.

·         Windows 8 will run all windows 7 apps? Even on ARM?

·         Themes

o   Remimaging windows

o   Metro style apps

§  Full screen

§  Immersive

§  Touch enabled

§  Fast and fluid

·         Performance gains

o   Windows 8 running lower resources than windows xp?

o   Less memory

§  540 vs 281mb   

·         Picture password

o   Touch based password entering

·         Home screen shows data at a glance

o   Email

o   Appointments

o   Etc.

·         Windows 8 has a similar win7 interface as well

·         Windows 8 has a very metro (wp7/xbox) style interface

·         Share App?

o   Semantically rich clipboard

o   Contracts?

·         Settings sync across multiple systems

o   Login profile pic

o   If used with a windows live id

§  Wonder how it works with ad login


·         Apps should work together as a web of apps on your machine

·         Windows 8 apps written in

o   Html5 / js

§  Native controls being called from js

·         Windows ui controls

§  Client apis being exposed to javascript

§  Expression Blend 5 to edit HTML5 apps for win8


o   Xaml/Silverlight

§  Existing Silverlight app taken and made to work like a metro app

o   If you write app in html5/xaml it will just run on ARM processors


·         Windows App store for purchasing win8 apps

o   Will show were in the process the app certification is at in app hub

o   Devs will get tech compliance tools to make sure their apps meet requirements

o   Plus over apples controlling model

o   Will list win32 apps (quicken) in app store as well

·         Windows 8 bootup super fast

o   Almost booted up in the same time that the monitor took to come on

·         Demo Gremlins – lol

·         New power state that uses ultra low power

·         Resolution support

o   1024 width – metro apps run

o   1366 width – side by side is possible

·         Tap 2 share

o   Cards have antennas (rfid?) that can give info to machine just by tapping

·         Lots of work built into connectivity to allow for roaming between 3g and wifi

·         Samsung windows developer pc

o   1 year of 2gb/mo included

o   4gb ram

o   64gb ssd

o   Sensor

o   Usb

o   Dev preview of win8

o   Made for developers

o   Has samples and sdks shown during keynote

·         Windows 8 as a professional platform

o   Keyboard/mouse/dual monitors

o   Can use pin based security

o   Roll mouse down in bottom left hand corner brings up start menu

o   New task manager has improved view of cpu/memory/disk usage

o   Refresh your PC without losing your files

§  Keeps metro apps

§  Non metro apps will need to have a command line tool ran to do a refresh (ie visual studio)

o   Reset your PC will be just like a fresh clean install

o   Remote desktop will allow touch interface

o   Hyper v in the windows client?

o   Up button in explorer takes you to parent directory

o   Background images will now span multiple monitors

o   Just typing at the start screen will bring up search